Filter
Top Products
Settings for the Sound
(AUDIO SETUP)
W
TRACK SELECTION
Gives the sound track which contains the highest number
of channels priority when you play a DVD on which
multiple audio formats
(KM,
DTS or Dolby Digital
format) are recorded
l
QFJ
: No priority given
l
AUTO : Priority given
Notes
l When you set this item to “AUTO”, the language may change
depending on the “AUDIO” settings in “LANGUAGE SETUP”
The “TRACK SELECTION” setting has higher priority than the
“AUDIO” settings in “LANGUAGE SETUP” (page 46)
l If you set “DTS” in “AUDIO SETUP” to “OFF”, the DTS sound
track is not played even if you set this item to “AUTO” and the
highest-numbered channel audio is recorded in DTS format
l If PCM, DTS and Dolby Digital sound tracks have the same
number of channels, the player selects PCM, DTS and Dolby
Digital sound tracks in this order
l Depending on the DVD, the audio channel with priority may
be predetermined In this case, you cannot give priority to the
DTS or Dolby Digital format by selecting “AUTO
“
“AUDIO SETUP” allows you to set the sound according
to the playback conditions
The default settings are underlined
Select “AUDIO SETUP” in the setup display
W
AUDIO ATT (attenuation)
If the playback sound is distorted, set this item to “ON
”
The player reduces the audio output level
Selects the setting of the output from the AUDIO OUT (1,
2) connectors according to the audio equipment to be
connected
l
QFJ:
turns off the audio attenuation Normally select
this position
l
ON: reduces the audio output level so that no sound
distortion occurs Select this when the playback sound
from the built-in TV speakers is distorted
Note
The setting does not affect the output from the DIGITAL OUT
OPTICAL and COAXIAL connectors
q AUDIO DRC (Dynamic Range Control)
Makes the sound clear when the volume is turned down
when playing a DVD This function works only when
you play a DVD which has the AUDIO DRC function
This affects the output from the DIGITAL OUT connectors
only when “DOLBY DIGITAL” is set to “D-PCM” in
“DIGITAL OUT,” and it affects the output from the
AUDIO OUT
(1,2)
connectors
l
STANDARD: Normally select this position
l
TV MODE: makes the low sounds clear even if you turn
the volume down It is especially recommended when
you listen to the sound using the speakers of the TV
l
WIDE RANGE: It gives you the feeling of being at a live
performance When you use high quality speakers, it is
more effective
Note
When you play
DVDs
without the AUDIO DRC function, there
may be no effect on the sound
51