Filter
Top Products
If you connect the player to a monitor or
projector having component video input
connectors that conform to output signals from
the COMPONENT VIDEO OUT
(V.
PelB-Y,
PR/R-Y)
connectors on the player
Connect the component via the COMPONENT VIDEO
OUT connectors using three video connecting cords (not
supplied) of the same kind You will get a better picture
Monitor or projector
CDlDVD
player
with component video
input connectors
Notes
l Refer to the instructions supplied with the component to be
connected
l Do not connect this player to a video deck If you do, noise
may appear in the picture
Connect
directly
l Depending on the TV or receiver (amplifier), sound distortion
may occur because the audio output level is high In this case,
set “AUDIO ATT” in “AUDIO SETUP” to “ON” in the setup
display For details, see page 51
Some setup adjustments are necessary for the player
depending on the TV or other components to be
connected
Use the setup display to change the various settings
For details on using the setup display, see page 43
l To connect the player to a normal TV
In the setup display, set “TV TYPE” in “SCREEN
SETUP” to
“4:3
LETTER BOX” (default setting) or
“4:3
PAN SCAN
fl
For details, see page 47
l To connect the player to a TV having the WIDE
MODE function
In the setup display, set “TV TYPE” in “SCREEN
SETUP” to
“16:9/4:3
WIDE MODE
“
For details, see
page 47
l
To connect the player to a wide-screen TV
In the setup display, set “TV TYPE” in “SCREEN
SETUP” to
“16:9/4:3
WIDE MODE
”
For details, see
page 47
9