Sony DVP-S360 DVD Player User Manual


 
itional
Troubleshooting
If you experience any of the following difficulties while
using the player, use this troubleshooting guide to help
remedy the problem Should any problem persist, consult
your nearest Sony dealer
Power
The power is not turned on.
I)
Check that the AC power cord is connected
securely
There is no picture.
+
Check that the player is connected securely
+
The video connecting cord is damaged
Replace it
with a new one
I)
Make sure you connect the player to the video
input connector on the TV (page 8)
I)
Make sure you turn on the TV
+
Make sure you select the video input on the TV so
that you can view the pictures from the player
Picture noise appears.
+
Clean the disc
+
If the video signal from your DVD player has to go
through your VCR to get to your TV, the copy-
protection applied to some DVD programs could
affect picture quality If you still experience
problems after checking your connections, please
try connecting your DVD player directly to your
TV’s S VIDEO input, if your TV is equipped with
this input (page 8)
Even though you set the aspect ratio in “TV
TYPE” in “SCREEN SETUP” of the setup display,
the picture does not fill the screen.
+
The aspect ratio is fixed on your DVD
55