Filter
Top Products
Audio
Good picture, no sound Press so that disappears from the screen (see page 58).
Make sure the option is set to in the Audio menu (see page 107).
(For KDL42XBR950 only) Make sure the switch at the rear of the
display unit is set to
Audio noise Communication problems may occur if the infrared communication equipment
(e.g., infrared cordless headphones) is used near the TV. Please use headphones
other than infrared cordless headphones. Also, if you use the infrared
comnmnication equipment other than infrared cordless headphones, move the
infrared transceiver away from the TV until the noise is eliminated, or move the
transmitter and receiver of the infrared communication equipment closer together.
Cannot gain enough volume Increase the volume of the cable box using the cable box's remote control. Then
when using a cable box press repeatedly until the TV indicator lights up and adjust the TV's
volume.
Sound seems weak or The TV's audio might be set to or , when it might be better set to
insufficient . In the Audio menu (see page 106), set the setting to :. If
already set to , switch to (which may reduce background noise
during weak stereo broadcasts).
Cannot raise the volume on Ifthe option is setto and the option is setto : (in
external speakers order to output the sound to your audio system) use your audio receiver to adjust
the sonnd (see page 107). Or, to use the remote control, set the option
to .
To turn on the TV's speakers, set the option to (see page 107).
Channe_
Cannot receive upper channels Press to select the VHF UHF input. (see page 58)
(UHF) when using an antenna Use in the Channel menu to add receivable channels that are not
presently in the TV's memory (see page 110).
TV is fixed to one channel Use in the Channel menu to add receivable channels that are not
presently in the TV's memory (see page 110).
Checkyour settings (seepage 110).
Cannot receive any channels Use in the Channel menu to add receivable channels that are not
when using cable presently in the TV's memory (see page 110).
Press to select the CABLE input. (see page 58).
Cannot receive or select Use in the Channel menu to add receivable TV channels that are
channels not presently in TV's memory (see page 1 i0).
Some digital cable channels are Certain cable companies have limitations on the broadcast of digital cable
not being displayed channels. Check with your cable company for snore infomlation.
The digital cable channel may be set to in the Digital Setup menu (see page
78).