Filter
Top Products
The remote control is preset to operate Sony brand video equipment.
Beta, ED Beta VCRs 303
8mm VCR 302
VHS VCR 301
DVD player 751
iiINK 901
If you have video equipment other than Sony brand that you want to control
with the TV's remote control, use the t\_ltowing procedure to program the
remote control.
The equipment must have infrared (IR) remote capability in
order to be used with the remote control.
Turn to the list of"Manufacturer's Codes" on page 6l, and find the
three-digit code number for the manui_acturer of your equipment. (If
more than one code number is listed, use the nmnber listed first.)
Press repeatedly until the DVD/VCR, SAT/CABLE or
i.LINK indicator lights up.
Press for five seconds until the indicator of the selected
input flashes.
While the desired indicator is flashing, enter the three-digit
manufacturer's code nmnber.
Press :_
You must do step 5 within 10 seconds of step4, or you must
redo steps 4 through 5.
To check if the code nmnber works, aim the remote control at the
equipment and press that corresponds with that equipment. If
it responds, you are done. If not, try using another code listed for that
manufacturer.
If more than one code nmnber is listed, try entering them one by one
until you come to the correct code for your equipment.
If you enter a new code nmnber, the code number you previously
entered at that setting is erased.
In some cases, you may not be able to operate your equipment with the
TV's remote control. In such cases, use the equipment's own remote
control unit.
Whenever you remove the batteries to replace them, the code numbers
may revert to the factory setting and must be reset.