Filter
Top Products
12
Most TV channels broadcast information via teletext. The index page of the teletext
service (usually page 100) gives you information on how to use the service.
Please use a TV channel with a strong signal, otherwise there may be
Teletext errors.
216-02
01 03 04 05 06 07 0802
Operation
Teletext
Switching Teletext on and off
1 Select the TV channel which carries the teletext service you want to view.
2a Press the button once on your remote control to switch Teletext on.
b Press
again for Mix mode.
The TV broadcast and the Teletext display are overlapped.
3 Press ; or press a third time to switch teletext off.
Selecting a Teletext Page
Input the three digits of the page number using the number buttons on your remote
control.
If you have made a mistake:
Type in any three digits, then re-enter the correct page number.
Page Catching
1 Using the number buttons on the remote control, select a teletext page which
has several page numbers on it (e.g. the index page).
2 Press the OK button.
Page Catching is displayed.
3 Select the desired page number using 4 or $ then press the OK button.
The requested page is displayed after some seconds.
Selecting the next or the preceding page
•
Press (Page +) or (Page -).
Selecting the index page
•
Press
+
;
.
Selecting a subpage
A teletext page may consist of several subpages. In this case an information line
is displayed, showing the number of subpages.
•
Select the mode by pushing to 4. Select the subpage by using 4 or $.
Freezing a Teletext subpage
1 Press to freeze the Teletext page.
2 Press
to resume normal teletext reception.
Using Fastext*
*depending on availability of service
Fastext lets you access pages with one button stroke. When Fastext is broadcast,
a colour-coded menu appears at the bottom of the screen. The colours of this
menu correspond to the red, green, yellow and blue buttons on the remote
control.
•
Press the coloured button which corresponds to the colour in the
colour-coded menu.