Filter
Top Products
16
Using the Features menu
1 Press the MENU button on the remote control. Select the symbol using $.
Push to z to enter.
2 Select the desired menu item using $. Push to z to enter.
3 Select the desired setting using 4 or $.
4 Store by pressing OK.
5 Press MENU to return to the normal TV screen.
Operation (TV menu system):
Features
Item Effect/Operation
Auto Format* 4 Off: Size of picture does not automatically adjust.
*only for aerial signal Normal: Size of picture automatically adjusts
according to information from broadcaster.
$ Full: The TV can automatically adjust the picture
size to eliminate any dark areas on the TV
picture (as shown below):
Format Correction* 4 On: Smart mode is selected automatically for
*only if Auto Format is 4:3/14:9 broadcasts
set to ‘Normal‘ or ‘Full‘ $ Off: 4:3/14:9 is selected
Sleep Timer You can select a time period after which the TV
switches itself into standby mode
4 Off
10 min.
20 min.
.
.
.
$ 90 min.
Parental Lock 4 Off: Normal mode
$ On: TV can only be switched on out of
standby-mode using the Remote Commander,
the buttons on the TV do not work.
AV2 Source You can select the source to be output from the
Scart connector
Y2/j2. In this way you can
record from this socket while watching another
source.
4 TV audio/video signal from the aerial ˘
AV1 audio/video signal from Scart 1
AV2 audio/video signal from Scart 2
$ AV3 audio/video signal from connectors on top or
bottom of rear of TV.
Features
Auto Format
Format Correction
Sleep Timer
Parental Lock
AV 2 Source
Off
Off
TV
Select: Enter:
Off
Normal
Full
Auto Format
Off
Normal
Full
Format Correction
Off
On
10 min
Sleep Timer
Parental Look
Off
On
AV 2 Source
AV 1
AV 2
AV 3
TV