Filter
Top Products
23
Optional Equipment
L/G/S/IR/D/D/D
R/D
D/D
L/G
S/I
2
S
2
1
3
S
3
1
A B C
D
E
F
DVD
VHS
1
2
G
You can connect a wide range of optional equipment to your TV set.
In order to get the input signal of a connected equipment onto the TV screen, you need to select the symbol of the
connector, to which you have connected the device.
1
Press … repeatedly on the remote control to select one of the following input modes:
Symbol on the screen Input signals from Connector
…1 Audio/Video from Scart connector D or* RGB from Scart connector D
…2 Audio/Video from Scart connector E or* S-Video from Scart connector E
…3 Audio/Video from the phono jacks A and B or from Scart connector F or* S-Video from
the 4-pin DIN connector C or from Scart connector F
* automatic detection of the signal according to the connected equipment
2
Press ; to return to the normal TV screen.
Selecting an input signal
If the picture or sound is distorted, move the VCR away from the TV set.
When connecting a monaural VCR, connect only the white jack to both the TV set and the VCR.
Connect your DVD-player to Scart 2 Y2/j2 E.
For information on how to select the output signal of the Scart 2 Y2/j2 E, see page 16.