Filter
Top Products
Chapter 3 Operations for Linear/Nonlinear Editing 3-1 (E)
3-1 Operations for Linear Editing
(Operations in File Units)
The MAV-555 handles material in units referred to as files. Therefore, to
carry out recording or playback using the MAV-555, operations
corresponding to loading a tape on a VTR are required, that is, creating a
new file (for new recording) or selecting an already recorded file
(assignment). Using the MAVE-F555, you can carry out operations which
cannot be carried out from a BVE-series editor, selecting or creating files
on the MAV-555.
3-1-1 File Selection
Selecting a file
Various messages appear superimposed on the monitor screen connected to
the MONITOR OUT connector of the MAV-555, reflecting operations.
Carry out operations while checking the monitor screen.
R
STORE
+
-
P1 P2 BG
PORT/FILE ASSIGN
To select a file, use the following procedure.
1 Press one of the R, P1, P2, and BG keys, and specify the port (on the
MAV-555) on which you want to make the file selection.
Rp] R [MAV No0003
Ch i cago*Or l and
If you press the R, P1, or P2 key, the MAV-555 port selection depends
on the MAV-555 port settings and the current recorder selection. If you
press the BG key the selected MAV-555 port (background port)
depends on the circuit board configuration of the MAV-555.
For details of MAV-555 port setting, see Section 2-2-2, “Port Settings” (page
2-5).
For details of the recorder selection function, see Section 3-4, “Recorder
Selection Function” (page 3-63).
For details of the background port, see Section 3-3, “Background Operation”
(page 3-59).
Chapter 3 Operations for Linear/Nonlinear Editing
1
2
MAV-555 port