Filter
Top Products
3-2 (E) Chapter 3 Operations for Linear/Nonlinear Editing
3-1 Operations for Linear Editing (Operations in File Units)
2 Use the – / + keys to select a file.
Each time you press a key, the file changes in the sequence of the
MAV-555 internal file numbers.
Rp] R [MAV No0003
Ch i cago*Or l and
Selecting a File with the MAVE-D555 Search Dial
When the MAVE-D555 is connected to the MAV-555, files can be selected
with the search dial on the MAVE-D555.
1 On the MAVE-D555 press the R, P1, P2, or BG key to specify the
MAV-555 port for file selection.
2 Press the + and – keys together.
The file list is displayed on the monitor screen.
3 Turn the MAVE-D555 search dial to move the pointer to a file in the list.
4 To open the file currently designated by the pointer, on the MAVE-F555
press the EXECUTE/REC key.
To remove the designated file from the list, on the MAVE-D555 press the
ALL STOP key.
Notes
• The file selection can only be carried out for an MAV-555 port. The
above operation is invalid for a port to which a VTR is connected.
• If you press the + and – keys as explained above in “Selecting a File with
the MAVE-D555 Search Dial” a list of files registered on the MAV-555
is displayed, but the actual file loading does not start until the specified
time has elapsed after the last key press. You can use the MAV-555 to set
the amount of time to elapse after the last key press before the file starts
loading.
For details on these settings, see Section 2-2-4, “Settings for Changing File
Times” (page 2-6).
File name
File number