Filter
Top Products
Chapter 3 Operations for Linear/Nonlinear Editing 3-7 (E)
To copy a file opened on the current port
Hold down the NEW FILE key, and press the key ( R, P1, P2, or BG key) for
the current selected port.
• This duplicates the file opened on the currently selected port, and opens the
duplicate file on the currently selected port.
• The file used to make the duplicate can now be opened on another playback
port.
For example, if the port corresponding to the R key is currently selected, hold
down the NEW FILE key and press the R key to make a duplicate of the file
which was opened on the port for the R key, close the original file, and open
the duplicate file on the port for the R key.
To copy a file registered to a MEMORY key
You can create a copy of a file registered to a MEMORY key of the MAVE-
F555, and open it on the currently selected port. Hold down the NEW FILE
key, and press the MEMORY key to which the file you want to copy is
registered (one of 1 to 4).
• This duplicates the file registered to the key you pressed, and opens the
duplicate file on the currently selected port.
File names of created files
When you make a copy of an existing file with the above operation, it takes
the name of the original file with a number suffix. For example, if you copy a
file named “Program” as above, the copies will be named “Program.1,”
“Program.2,” and so on in sequence.
For details of file names, see the MAV-555 Operation Manual.
Note
Opening a copy of an existing file is not possible on the BG port when the BG
button on the MAVE-F555 has been assigned to the R2 port of the MAV-555.
In this case, both the operation of pressing the NEW FILE key + BG key and
the operation of pressing the NEW FILE key + MEMORY key are invalid.