Filter
Top Products
Chapter 3 Operations for Linear/Nonlinear Editing 3-21 (E)
Inserting a cut
The operation for inserting a cut depends slightly on whether the section for
insertion as the cut is specified on the player, or whether a section on the
recorder is specified for insertion as the cut (in other words, an operation
within a single file).
Specifying a section on the player, and inserting at a specified
position on the recorder
REDO
UNDO
V A1 A2 A3 A4
TRIM
MARK
SPLIT
MARK OUTMARK IN
REPLAY
PREVIEW
EXECUTE/
REC
SHIFT
R
STORE +
-
P1 P2 BG
PORT/FILE ASSIGN
1 Press the [ ] key, and select INSERT mode.
2 Select the player port.
To select another file, follow the procedure in the section “Selecting a file”
(page 3-1).
3 Use the MAVE-D555 or BVE-series editor jog dial to search for the IN
point.
4 Press the MARK IN key on the MAVE-F555.
The time data of the IN point appears on the monitor screen connected to
the MONITOR OUT connector of the MAV-555.
1
2
10
11
4,9
7
6