Filter
Top Products
Chapter 3 Operations for Linear/Nonlinear Editing 3-31 (E)
• Using the jog dial of the MAVE-D555 or BVE-series editor, for example,
search for the IN point and OUT point.
• The time data of the IN point and OUT point appear on the monitor
screen connected.
0:10:01:00P IN 0 V1234
0:10:03:00 OUT 0
0:00:02:00 DUR 0
4 Select the recorder port.
5 Press the MARK IN key and MARK OUT key on the MAVE-F555 to set
the IN point and OUT point respectively.
• Using the jog dial of the MAVE-D555 or BVE-series editor, for example,
search for the IN point and OUT point.
• The time data of the IN point and OUT point appear on the monitor
screen connected.
0:10:01:00R IN 0 V1234
0:10:03:00 OUT 0
0:00:02:00 DUR 0 EDIT
6 Using the channel specification keys (V, A1, A2, A3, and A4), select the
channel(s) which you will overwrite with the cut.
• Press the key(s) corresponding to the channel(s) you want to overwrite,
turning on the indicator(s) above the key(s).
• If you select only specific channels to overwrite, see next page “Notes”.
7 To execute the cut overwriting, press the EXECUTE/REC key.
• This overwrites the cut, and “EDITED” appears on the monitor screen.
• The recorder file is replaced by the editing result file (the file after
overwriting the cut), and the unit cues up to the OUT point of the inserted
section.
While player port is selected IN point/OUT point
Duration
While recorder port is selected IN point/OUT point
Duration