Filter
Top Products
91
Settings and Adjustments
• MPEG (DVD VIDEO only)
Selects the type of MPEG audio signal.
• DTS (DVD VIDEO only)
Selects whether or not to output DTS signals.
Note
When you use the DIGITAL OUT (COAXIAL) jack to
listen to MPEG audio signals and set “MPEG” to
“MPEG” in Audio Setup, no sound will come from your
speakers if you select one of the TVS modes.
Recording and Parental
Control Settings (Features)
The Features Setup allows you to adjust recording
and parental control settings.
1 Press SYSTEM MENU while the recorder is
in stop mode.
2 Select “SETUP,” and press ENTER.
3 Select “Features,” and press ENTER.
The Features Setup appears with the
following options. The default settings are
underlined.
TV Direct Rec (DVD+RW/DVD-RW/DVD+R/
DVD-R only)
Auto Chapter
Automatically divides a recording (a title) into
chapters by inserting chapter markings at a
specified interval. The markings are inserted while
the recording is being made.
PCM Select this when the recorder
is connected to an audio
component without a built-in
MPEG decoder. If you play
MPEG audio sound tracks,
the recorder outputs stereo
signals via the DIGITAL
OUT (COAXIAL) jack.
MPEG Select this when the recorder
is connected to an audio
component with a built-in
MPEG decoder.
On Select this when the recorder
is connected to an audio
component with a built-in
DTS decoder.
Off
Select this when the recorder
is connected to an audio
component without a built-in
DTS decoder.
On Allows you to easily record
what you are watching on the
TV using SMARTLINK.
Off Turns off the TV Direct Rec
function.
Off No chapter mark is inserted.
6Min
Inserts chapter marks at
approximately 6-minute
intervals.
15Min Inserts chapter marks at
approximately 15-minute
intervals.
Settings
Video
Audio
Features
Options
Easy Setup
TV Direct Rec :
Auto Chapter :
TV Guide Page
Parental Control
One Touch Dubbing
Colour System :
On
6 Min
PA L
SETUP
,continued