Filter
Top Products
95
Settings and Adjustments
Disc and Remote Control
Settings/Factory Settings
(Options)
The Options Setup allows you to set up other
operational settings.
1 Press SYSTEM MENU while the recorder is
in stop mode.
2 Select “SETUP,” and press ENTER.
3 Select “Options,” and press ENTER.
The Options Setup appears with the following
options. The default settings are underlined.
Format DVD (DVD-RW only)
The recorder automatically starts formatting in
VR mode or Video mode, whichever is selected
below, when a new, unformatted DVD-RW is
inserted.
DVD Bilingual Rec. (for all recordable discs
except DVD-RW in VR mode)
Selects the sound to be recorded on the disc. This
setting is not necessary when recording on DVD-
RWs (VR mode) that record both the main and sub
sounds.
Dimmer
Adjusts the lighting of the front panel display.
Auto Display
Command Mode
Changes the Command Mode of the recorder if
other DVD equipment is assigned the same
Command Mode. Be sure to match the Command
Mode switch on the remote to the setting made
here. For details, see “If you have a Sony DVD
player or more than one Sony DVD recorder” on
page 21.
Factory Setup
Allows you to select the setup settings by group,
and return them to their default settings. Note that
all of your previous settings will be lost.
1 After step 3 above, select “Factory Setup,”
and press , or ENTER.
The display for selecting a group of settings
appears.
2 Select the group of settings you want to return
to default from “Settings,” “Video,” “Audio,”
“Features,” “Options,” “Parental Control,”
and “All,” and press , or ENTER.
3 Select “Start,” and press ENTER.
The selected settings return to their default
settings.
4 Press ENTER when “Finish” appears.
VR Automatically formats the
disc in VR mode.
Video Automatically formats the
disc in Video mode.
Main
Records the main sound for
the bilingual programme.
Sub Records the sub sound for
the bilingual programme.
Settings
Video
Audio
Features
Options
Easy Setup
Format DVD :
DVD Bilingual Rec. :
Dimmer :
Auto Display :
Command Mode :
Factory Setup
VR
Main
Normal
On
DVD3
SETUP
Normal Bright lighting.
Power
Save
Low lighting. Turns off the
lighting when the power is off.
On Automatically displays
information on the screen
when the recorder is turned
on, etc.
Off Displays information only
when DISPLAY is pressed.
DVD1 Select this if the default
Command Mode conflicts
with other DVD equipment.
DVD2 Select this if the default
Command Mode conflicts
with other DVD equipment.
DVD3
The default Command Mode
of the recorder.