Filter
Top Products
21
GB
Changing or erasing the
function of a “learned”
button
To change the “learned” function,
erase it first and perform Learning
again.
To erase the “learned” function
of a single button
Continued
Example: To erase the “learned”
function from the VCR Number
button 1
1 Follow Step 2 on page 16 to
go to the LEARN mode.
2 Turn the Jog dial to select
the Setting position number
(“S-1” to “S-8”) of the
component you want to
erase. Then press the Jog
dial.
The component name flashes
in the display.
Note
If you have changed the name of
the component (page 26) that name
is displayed.
3 Turn the Jog dial to select
“DEL,” then press the Jog
dial.
“DEL” appears in the first row,
and “KEY?” flashes in the
display.
Tip
You can also press b/B instead of
turning the Jog dial to the left/right.
You can also press OK instead of
pressing the Jog dial (except for the
following Steps 4 and 5).
-3S
R
ARNLE
CV
ELD
EY
ARNLE
K?
4,5
Jog
dial