Filter
Top Products
13Getting Started
Getting Started
To check to see if the TV tuning is correct
Set the TV to the video channel and press PROGRAM +/– on the VCR. If
the TV screen changes to a different programme each time you press
PROGRAM +/–, the TV tuning is correct.
To obtain a clear picture from the VCR
If the picture does not appear clearly in step 5 above, go to step 6 to finish
this procedure once. Then start again from step 2. After pressing RF CH
SET in step 2, press PROGRAM +/– while the RF channel is displayed, so
that another RF channel (between 28 and 55) appears (see page 24 for
reference). Then tune the TV to the new RF channel until a clear picture
appears.
Note
• If you set the wrong TV system, you may have no sound or sound may be distorted
(noisy sound).