Filter
Top Products
19Getting Started
Getting Started
2 Press CURSOR >/./?// to move the
cursor (z) to SYSTEM, then select either
I, D/K, B/G, or M, whichever is
applicable in your area. If SYSTEM is set
to the wrong position, the sound will be
distorted or noisy.
3 Press CURSOR >/./?// to move the
cursor (z) to NORMAL/CATV, then select
NORM.
To preset CATV channels, select CATV.
4 Press CURSOR >/. to move the cursor
(z) to AUTO PRESET, then press
EXECUTE.
All receivable channels are preset in
numerical sequence. When no more
receivable channels can be found,
presetting stops and the picture from the
lowest numbered channel is displayed on
the TV screen.
•
CURSOR
•
CURSOR
• EXECUTE
continued
SELECT :
SET :
[ V v ]
[ B b ]
TUNER PRESET
NORMAL / CATV
SYSTEM
AUTO PRESET
CHANNEL SET
AFT
2
NORM
• CATV
PROG1
ON• OFF
FINE TUNING
B/GD/KI•M
SELECT :
SET :
[ V v ]
[ B b ]
TUNER PRESET
NORMAL / CATV
SYSTEM
AUTO PRESET
CHANNEL SET
AFT
NORM
• CATV
PROG1
ON• OFF
FINE TUNING
B/GD/KI•M
2
TUNER PRESET
NORMAL / CATV
SYSTEM
AUTO PRESET
CHANNEL SET
AFT
NORM
• CATV
PROG1
ON• OFF
FINE TUNING
B/GD/KI•M
PLEASE WAIT
2
Notes
• If you connect the VCR to a TV with the NTSC colour system, the picture quality
may be compromised during automatic presetting. A colour picture appears when
presetting is complete.
• The channel numbers besides CHANNEL SET may not be the same as those in your
area. This is because this VCR’s channel search system is based on the fixed TV
system that has the widest channel coverage. If necessary, apply your local channel
numbers to the programme positions (see “Changing programme positions” on
page 35).