Filter
Top Products
Additional Operations56
Checking/
changing/
cancelling timer
settings
Before you start…
• Turn on your TV and set it to the
video channel.
1 Press u to turn on the VCR.
2 Press MENU, then select TIMER SET/CHECK:
• If you want to change a setting, go on to the
next step.
• If you do not need to change the settings,
press EXECUTE, then turn off the VCR to
return to recording standby.
3 Press CURSOR >/. to select the setting you want to change or cancel:
• To change the setting, press CURSOR ?// to select the item you
want to change, and press CURSOR >/. to reset it. Then, press
CURSOR / repeatedly until the cursor (z) appears at the beginning
of the line.
• To cancel the setting, press TIMER CLEAR.
4 Press EXECUTE.
If any settings remain, turn off the VCR to return to recording standby.
u
MENU
EXECUTE
CURSOR
>/./?//
TIMER CLEAR
Programme 1
Programme 2
Programme 1
Programme 2
Will be cut off
20 seconds
20 seconds will be cut off
When the timer settings overlap
The programme that starts first has priority and the second programme
starts recording only after the first programme has finished. If the
programmes start at the same time, the programme listed first in the menu
has priority.
TIMER SET / CHECK
SAT
25.1
DATE START STOP PROG
.2
11
7:00 8:00 6
SP
.4
11
1:00 0:00 50
LP
– 2:12 3:00 27
LP
EVERY
3:00 0:00 L1
SP
–.– – –:–– –:–– –– –
–.– – –:–– –:–– –– –
–.– – –:–– –:–– –– –
–.– – –:–– –:–– –– –
0
2
11
2
SUN
TUE
SUN
SAT
MON
123
456
789