Filter
Top Products
22 Getting Started
Manual setup — Presetting channels (continued)
Disabling unwanted programme positions
After tuning the TV channels, you can disable unused programme positions.
The disabled positions will be skipped later when you press the PROG +/–
buttons.
You can also disable unwanted programme positions using the SET UP CH
AND G-CODE menu (see page 32).
1 In step 5 above, press programme number button “0” twice to display
the number “0” beside CHANNEL SET.
2 Press EXECUTE.
Resetting the TV system (only for areas where
various TV systems coexist)
If the sound is distorted or noisy, or the color TV programme becomes black
and white, etc., that channel may not be matched to the proper TV system. In
this case, try the following steps.
1 Press PROG +/– to select the programme position that has the channel
with above described conditions.
2 Press MENU, then select TUNER PRESET and press EXECUTE.
3 Select SYSTEM and select the TV system on which you can obtain the
best sound and picture.
4 Repeat steps 2 and 3 for other positions you want to preset the TV
system to.
5 Press EXECUTE.
Checking the TV system
Press PROG +/– to choose the
programme position.
The multi system indicator (I, D/K,
B/G, or M) of the selected
programme position’s TV system
lights up.
Multi system indicators