Filter
Top Products
15Getting Started
Getting Started
5 Press CURSOR >/. to select either I, D/
K, B/G, or M, whichever is applicable in
your area, then press EXECUTE.
The VCR starts searching for all the
receivable channels.
During presetting, the channel being
located is displayed on the screen.
When all the channels are preset, the
following screen appears.
Even if various TV systems coexist in your
area, the AUTO TUNER PRESET function
picks up most of the channels on the TV
systems other than the one you selected.
But you need to manually reset the proper
TV system for the unmatched channels (see
“Resetting the TV system” on page 22).
If necessary, you can add or disable the channels manually (see
“Presetting channels manually” on page 20).
6 Using CURSOR >/./?//, set the G-CODE guide channels,
change the programme positions of the stations, and disable the
unused programme positions. (If not necessary, skip this step.)
The setting procedures are the same as those described in “Manual
setup — Setting up G-CODE” on page 32 and ”Manual setup —
Changing/disabling programme positions” on page 35.
7 Press EXECUTE.
The CLOCK SET menu appears.
8 Set the date and time using CURSOR
>/./?//. The setting procedures are
the same as those described in “Manual
setup—Setting the clock” on page 38.
9 Press EXECUTE.
continued
•
CURSOR
•
CURSOR
• EXECUTE
• EXECUTE
•
CURSOR
EASY SET UP
PLEASE WAIT
AUTO TUNER PRESET
B/GCH 42
1–2– –4–5
3
CLOCK SET
END : [ EXECUTE ]
55SAT11
SELECT :
SET :
[ B b ]
[ V v ]
EASY SET UP 1–2–3–4–
. . 997 :3020 1
5
• EXECUTE
EASY SET UP
1
2
3
4
PROG CH GUIDE CH
––––
5
3
9
1
2
5
2
7
6
–
–
–
–
–––
–––
–––
–––
SELECT
1–2–3–4–5
: [ TIMER CLEAR ]ERASE PROG
MOVE PROG : [ b ]
:[ V v ]