Filter
Top Products
Additional Operations 61
About Adaptive Picture Control (APC)
Adaptive Picture Control (APC) automatically
improves recording and playback quality by
adjusting the VCR to the condition of the video
heads and tape. To maintain better picture quality,
we recommend that you set APC to ON in the SET
UP MENU (with the APC indicator in the display
window lit).
APC playback
The APC function automatically works on all types of tapes, including rental
tapes and tapes that were not recorded with APC.
APC recording
Whenever you insert a tape and start recording for the first time, the VCR
adjusts to the tape using the APC function (the APC indicator flashes
rapidly). This adjustment is retained until the tape is ejected.
To deactivate the APC
Press MENU and select SET UP MENU, then set APC to OFF. The APC
indicator in the display window goes off.
Note
• There is a delay of a few seconds before the VCR actually starts recording while the
VCR analyses the tape. To avoid the delay, first set the VCR to recording pause (the
APC indicator flashes slowly) and press r REC to have the VCR analyse the tape
(the APC indicator flashes rapidly). After the APC indicator stops flashing, press
P PAUSE to start recording immediately. If you want to start recording quickly
without using the APC function, first set the VCR to recording pause (the APC
indicator flashes slowly) and press P PAUSE to start recording.
Adjusting the picture
Adjusting the tracking
Although the VCR automatically adjusts the tracking when playing a tape
(the tracking indicator
flashes in the display window, then goes off),
distortion may occur if the tape was recorded in poor condition. If so,
manually adjust the tracking.
Press TRACKING +/– on the VCR to display the
tracking meter. The distortion should disappear as
you press one of the two buttons (the
indicator
lights up). To resume automatic tracking
adjustment, eject the tape and reinsert it.
Tracking meter
NORMAL TRACKING
SET UP MENU
SELECT :
SET :
[ V v ]
[ B b ]
BUZZER
ON OFF
AUDIO MIX
HIFI AUDIO
APC ON• OFF
STD NICAM
ON •OFF
•
•
PAL/MESECAM
AUTO• PAL MESECAM