Filter
Top Products
Basic Operations48
Recording TV programmes using G-CODE (continued)
2 Press the programme number buttons to
enter the programme’s G-CODE number.
If you make a mistake, press TIMER
CLEAR and re-enter the correct number.
3 Press TAPE SPEED to select the tape
speed, SP or LP.
To set the EP mode for the NTSC colour
system, display “LP” in the tape speed
position.
4 Select ONCE, DAILY or WEEKLY by using
CURSOR ?//, then press SET:
The date, start and stop times, programme position, and tape speed
appear on the TV screen.
If the information is not correct, press TIMER CLEAR to cancel the
setting.
5 To enter another setting, repeat steps 1 to 4.
6 Press u to turn off the VCR.
The TIMER indicator appears in the display window and the VCR
stands by for recording.
To stop recording
To stop the VCR while recording, press p STOP.
To record
Only once
Everyday Monday to Friday
Once a week
Select
ONCE
DAILY
WEEKLY
123
456
789
0
•
CURSOR
SET
•
G-CODE
G-CODE
No.
9–776824[
SP
LP/
[ LP ]
]1
CANCEL : [ TIMER CLEAR ]
RECORDING TIME
58:01
MON
23
LP
DATE START STOP PROG
.1 0 0 :022 0
TAPE
SPEED
G-CODE
G-CODE
No.
9–776824[
SP
LP/
[ SP ]
]1
SELECT :
CANCEL : [ TIMER CLEAR ]
CONFIRM : [ SET ]
[ B b ]
•ONCE DAILY WEEKLY
G-CODE
G-CODE
No.
9–776824[
SP
LP/
[ LP ]
]1
SELECT :
CANCEL : [ TIMER CLEAR ]
CONFIRM : [ SET ]
•ONCE DAILY WEEKLY
[ B b ]