Filter
Top Products
8-7. Managing Channels
Auto Program (Channel Search)
Automatically finds all channels (both analog and digital) available through the antenna and
cable inputs, and stores all the active channels in the channel list. Inactive or weak channels
may not appear in the list. In that case, add missing channels manually in the Manual Ch. Add
menu. The channel list created here can be shown in the Favorite/Ch. Edit menu.
To scan the channels with the antenna:
1.
Press the
Menu
button on the Remote Control to display the on-screen menu.
2.
Scroll down using “
E
” on the remote control.
3.
Select the
Setup
menu by pressing “ ”.
4.
Auto Program will be automatically highlighted.
5.
Move the highlight to the right with “
G
” to select “Start”.
6.
Press “ ” and the moving yellow bar will indicate the progress scanning the channels. When the
scanning process begins, “Start” will change to “Next”. If you press “Next”, the scanning of the
Antenna signal source will be ignored and the scanning of the next signal source (cable) will pro-
ceed. Next the digital signals will be scanned.
7.
When the scanning is completed, the scanned result will be displayed.
8.
Press the
Exit
button on the remote control if you want to return to TV viewing.
66