Filter
Top Products
Setting the Player
(BASIC SETUP)
Items
Options (: Default settings)
ANGLE MARK
If various angles (multi-angles) for a scene are recorded on the DVD and you have
set this item to [ON], the mark appears at the scene.
ON
The mark will appear at the scene.
OFF
The mark will not appear at the scene.
CAPTION
Some discs have hidden captions of speech and narration recorded. The captions
will be displayed when a closed caption decoder or a component with a built-in
closed caption decoder is connected. Refer to the operating manual supplied
with the closed caption decoder or the component with a built-in closed caption
decoder.
ON The caption will be displayed on the screen.
OFF
The caption will not be displayed on the screen.
SCREEN SAVER
If you set the item to [ON], the screen saver image appears when you leave the
player in pause mode for more than 3 minutes. In case of CD and MP3, however,
the screen saver image appears after 3 minutes even during playback. The screen
saver will prevent the monitor from damage.
ON
Turns on the screen saver.
OFF Turns off the screen saver.
PBC
You can make the PBC menu of Video CDs not to appear on the screen.
ON
The PBC menu will appear when Video CDs are read.
OFF The PBC menu will not appear when Video CDs are read.
MULTI-DISC
RESUME
The player memorizes where the playback of the disc has been stopped. When
the same disc is loaded, the player resumes playback from the point. The player
memorizes up to 5 discs in terms of DVD, 12 discs in terms of Video CD, or 30
discs in terms of CD. When more discs are played, the memories of the oldest
discs played are replaced by new ones.
ON
Resumes playback of the discs.
OFF Starts playback from the beginning of the discs.
AVLS
Automatic Volume Limiter System. If you set the item to [ON], the maximum
volume is limited to prevent a sound leak or protect your hearing.
ON Limits the maximum volume.
OFF
Changes the volumes to the volume control.
CLOCK
page 21.
DEFAULT
You can reset all settings and adjustments except for the parental control setting to
the factory settings. You cannot change the setting during playback.
VERSION
Displays the firmware version.
46
D-VE7000S.US.2-683-363-12(1)