Filter
Top Products
Connection
Symptom Cause and/or corrective action
No picture appears on the TV
connected.
Set the LINE SELECT switch to OUT.
Color system setting is not correct for the TV. Set [COLOR
SYSTEM] according to the color system of the TV (
page
42).
Check the input/output setting on the TV.
The picture from the connected
component does not appear on the
screen of this player.
Set the LINE SELECT switch to IN.
The picture from the connected
component appears irregularly.
Press ENT to switch the color system of the player to that of
the external signal (
page 50).
No sound or distorted sound is
heard from the audio component
connected.
Set [DOWNMIX] or [DIGITAL OUT SETUP] according to the
component connected (
page 43).
Error displays
Display Cause and/or corrective action
HI DC IN
An AC power adaptor which is rated higher than the one
supplied or recommended is being used. Use only the supplied
AC power adaptor.
LOW BATTERY
The rechargeable battery is used up completely. Charge the
battery (
page 19).
Wrong Region
The region code of the DVD currently in the player does not
conform to the player (
page 9).
The operation cannot be done with the disc.
53
Additional Information
D-VE7000S.US.2-683-363-12(1)