Filter
Top Products
Setting Up the LCD Projection TV
39
Setting Up the LCD Projection TV
KDF-55/60XS955
2-059-372-11(1)
Satellite Receiver Disconnect all power sources before making any connections.
1 Connect the satellite antenna cable to the satellite receiver’s
SATELLITE IN jack.
2 Using A/V and S VIDEO cables, connect the satellite receiver’s AUDIO
and S VIDEO OUT jacks to the LCD projection TV’s AUDIO and S
VIDEO IN jacks.
3 Using a coaxial cable, connect your cable to the LCD projection TV’s
CABLE jack, or your antenna to the LCD projection TV’s VHF/UHF
jack.
✍ If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.
VHF/UHF CABLE
VIDEO IN
S VIDEO
VIDEO
AUDIO
L
(MONO)
R
1 3 4
R
78
L
AUDIO IN
Coaxial
cable
Satellite receiver
A/V cable (not supplied)
Rear of LCD projection TV
VIDEO (yellow)
AUDIO-L (white)
AUDIO-R (red)
Satellite
antenna
cable
S VIDEO
S VIDEO cable (not supplied)
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.