Filter
Top Products
Setting Up the LCD Projection TV
40
KDF-55/60XS955
2-059-372-11(1)
Satellite Receiver
with a VCR
Disconnect all power sources before making any connections.
1 Connect the CATV cable to the single (input) jack of the splitter.
2 Using a coaxial cable, connect one of the splitter’s two output jacks to
the LCD projection TV’s CABLE jack.
3 Using a coaxial cable, connect the splitter’s other output jack to the
satellite receiver’s VHF/UHF IN jack.
4 Connect the satellite antenna cable to the satellite receiver’s
SATELLITE IN jack.
5 Using a coaxial cable, connect the satellite receiver’s VHF/UHF OUT
jack to the VCR’s VHF/UHF IN jack.
6 Using A/V and S VIDEO cables, connect the satellite receiver’s AUDIO
and S VIDEO OUT jacks to the VCR’s AUDIO and S VIDEO IN jacks.
7 Using A/V and S VIDEO cables, connect the VCR’s AUDIO and S
VIDEO OUT jacks to the LCD projection TV’s AUDIO and S VIDEO
IN jacks.
8 Run Auto Program, as described in “Setting Up the LCD Projection TV
Channel List” on page 54.