Filter
Top Products
Using the Projection TV Features
49
Using the Timer
You can use the Timer to program the projection TV to turn on and off
and tune to a specific channel at two scheduled viewing times.
The first time you turned on the projection TV, a setup screen
prompted you to set the clock (see “Setting Up the Projection TV
Automatically” on page 35). If you didn’t set the clock during this
initial setup, you need to set it before you can use the Timer (see
page 50).
Setting the Timer 1 Press TIMER.
The Set Clock/Timers screen appears, with the current timer
settings shown.
2 To set the Timer, move the joystick V or v to highlight Timer 1 or
Timer 2, then press .
3 Move the joystick V or v to highlight one of the following
options
, then press .
4 If you selected Set in step 3, the setup screen for the selected Timer
(
Timer 1 or Timer 2) appears.
✍ The clock must be set before you can set either of the Timers. If the clock
is not set, Timer 1 and Timer 2 cannot be selected. To set the clock, see
“Setting the Clock” on page 50.
Set Select to set or change the timer settings for the selected
Timer (Timer 1 or Timer 2).
On Select to turn on the timer settings for the selected Timer
(Timer 1 or Timer 2).
Off Select to turn off the timer settings for the selected Timer
(Timer 1 or Timer 2).
You can also access the
Timer through the Setup menu.
For details, see page 66.
z