Filter
Top Products
18
Basic Operations
This section explains the basic functions to use while watching the TV.
Most of the operations can be done using the remote control.
Switching the Video/TV on and off
Switching on
Press POWER.
The STANDBY lamp flashes until the picture appears.
Switching off
Press POWER.
The Video/TV enters standby mode and the STANDBY lamp on the front
of the Video/TV lights up in red if a tape is inserted in the Video/TV.
If a tape is not inserted in the Video/TV, the STANDBY lamp disappears.
Selecting TV programs
Turn the cable mode ON or OFF to select the type of channel you want to
watch. For more information on setting the cable mode, see “Setting cable
TV on or off” on page 9.
Press CH +/– or the 0-9 buttons on the remote control, or CHANNEL +/–
on the Video/TV.
To select a double-digit numbers using the
0-9 buttons
For example, if you want to select 21, first press 2, then press 1.
Adjusting the volume
Press VOL +/–.
Muting the sound
Press MUTING.
“MUTING” appears on the screen.
To resume normal sound, press MUTING again, or press VOL +.
Switching quickly between two
channels
Press JUMP. The channel switches to the previously selected channel.
Pressing JUMP again switches the channel back to the originally selected
channel.
Basic Operations
Watching the TV
Note
You can not jump to channels you
scanned through using the CH +/–
buttons.
INPUT
SELEECT
–
VOL
+ –
CHANNEL
+
REC
STANDBY
POWER
EJECT
TIMER REC
POWER
‰/
STANDBY
EJECT
INPUT
SELECT
COUNTER/
REMAIN
COUNTER
RESET
SLEEP
MENU
CHVOL
SELECTRESET
INDEX
TAPE SPEED
X2 PAUSE
SEARCH
REC
SLOW
VCR Plus
MUTING DISPLAY
POWER
TV
&7
STOP
PLAY
REW FF
TIMER ON SCREEN
JUMP ENTER
1
2
3
4
5
6
7
8
9
0