Filter
Top Products
Digital features
20
The Main menu
Manual Tuning
This feature allows you to select a programme number from the displayed list and change the digital services
of that programme.
1. Press the button on the remote control to obtain the ‘Digital Info’ display. Press the BLUE button to
display the Main menu.
2. Press the V or v button to highlight ‘Detail Set-up’ then press the OK button to display the Detail Set-up
menu.
3. Press the V or v button to highlight ‘Manual Tuning’ then press the OK button to display the Manual
Tuning menu.
4. Press the V or v button to highlight the chosen programme number for your new channel. If you do not
wish to select any of the programme numbers listed, press the RED or GREEN button to display the
previous or next 5 programme numbers on the list.
5. With your programme number highlighted, press the OK button to display the ‘Manual Programme
Search’ screen.
6. Press the V or v button if you wish to change the channel number, then press the b button to make the
select search box active.
7. Press the V or v button to begin the search process. The words ‘Searching up’ or ‘Searching down’
appear in the select search box indicating that the TV is searching. If no Digital services are found on
the channel you have chosen, the channel number changes up or down automatically and the search
continues. When all services allocated to the selected channel have been found, the service selection
screen is displayed.
8. Press the V or v button to find and highlight the service you wish to allocate to the programme number
selected in Step 4, then press the OK button to store.
9. Repeat Steps 4 to 8 if you wish to manually add more channels to your TV. Press the BLUE button
repeatedly to remove all menus from the screen.
PIN Code
This feature allows you to set a new 4-digit PIN code.
1. Press the button on the remote control to obtain the ‘Digital Info’ display. Press the BLUE button to
display the Main menu.
2. Press the V or v button to highlight ‘Detail Set-up’ then press the OK button to display the Detail Set-up
menu.
3. Press the V or v button to highlight ‘PIN Code’ then press the OK button to display the PIN Code menu.
4. Enter your existing PIN code using the numbered buttons on the remote control. If you enter a wrong
number, press the RED button to clear and start again.
5. Once you have entered your PIN code, a new PIN screen appears. Enter your new PIN code, then enter
once again as instructed for confirmation.
6. When both PIN codes match, a message appears to inform you that your new PIN code has been
accepted. This is the PIN code you must use in future.
7. Press the BLUE button repeatedly until all menus are removed from the screen.
Note: If you have forgotten your PIN code, please use 9999. This PIN code will always be accepted.
D
IG
ITA
L
MODE
R
E
C
OK
DIGITAL
MODE
REC
OK
NX 13-22.fm Page 20 Wednesday, September 5, 2001 9:30 AM