Filter
Top Products
Getting started
6
D
IG
IT
A
L
M
O
D
E
REC
1
4
7
3
6
9
2
5
8
0
D
IG
IT
A
L
OK
5. Automatically tuning the TV
1. When you switch on this TV for the first time, the Language/Country
menu appears on screen with the word ‘English’ highlighted. Press
the V or v buttons on the remote control to choose the language you
require then press the OK button to confirm.
Note: The digital features of this set are designed for use in Great Britian only.
2. The word Country is now highlighted. Press the V or v buttons to
choose the country in which you wish to operate the TV, then press
the OK button to confirm.
The autotune prompt screen appears. Press the OK button to select
Yes and begin the digital autotune procedure.
As this may take some time, a menu appears on screen and informs
you of the tuning progress.
When all the available digital programmes are found, the analogue
tuning display appears and all the analogue signals are captured and
stored.
If no digital and no analogue signals are found, a display appears on
screen asking you to confirm your aerial is connected. Check your
aerial is connected then press the OK button to repeat the tuning
procedure.
Once all signals have been captured and stored, the TV returns to
normal operation and displays the digital programme captured on
programme number 1.
Note: If no digital signals are captured, then the analogue programme stored on
programme number 1 is displayed.
3. To view programmes, press the PROG+/- button or the numbered
buttons on the remote control.
Switching between digital and analogue
programmes
To check if you are watching a digital or analogue programme press the
button on the remote control. If you are watching a digital programme
an Info display appears on screen providing brief details for the current
and next programme. To change to analogue programmes press the
DIGITAL/ button. When you wish to return to digital programmes press
the DIGITAL/ button once more.
If you connected a VCR to your TV when following the ‘Connecting your aerial
instructions’, you now need to find your video channel.
1. First ensure the TV is in analogue mode. If not press the DIGITAL/ button on the
remote control.
2. Press the PROG+/- button on the remote control until the picture from the pre-
recorded tape appears on screen.
Notes: If you wish to move your video channel to a different programme number, refer to the
‘Rearranging your channels’ section of this manual.
If you have connected your VCR using a scart lead, press the
/ button repeatedly on
the remote control until the picture from the pre-recorded tape appears on the TV screen.
6. Finding your video channel
NX1-12.fm Page 6 Wednesday, September 5, 2001 9:16 AM