Filter
Top Products
PART 1
•
English
9
5. TV Scart Connector
Use this connector to connect your receiver to your TV using a scart cable.
6. VIDEO Scart Connector
Use this connector to connect your receiver to your video recorder using a scart
cable. Your video recorder signal will now be looped through to your TV.
7. IR SENSOR
Use this connector to connect your remote eye (optional accessory) to control your
receiver, for example once your receiver is hidden in a well ventilated cabinet
8. RS 232 Serial Port
This serial port is for service purpose only.
9. Input Antenna
RF Modulator (female part). If you have cable TV or if you have an outdoor antenna,
then you can connect the RF cable coming from the antenna or wall connector to
this ANT input.
10. To TV
RF Modulator (male part). If you do not use a scart cable to connect your receiver
to your TV, or if you have connected a cable to the ANT input, you will have to use
this connector to connect the receiver to your TV by using a coaxial cable. You can
also use this connector to connect a second TV set to your receiver.
11. S/PDIF
Use this coaxial output to connect your receiver to the input of your digital
audio amplifier.
12. Power Cord
Your receiver requires a mains voltage supply of 90~240 V AC (Auto-selectable),
50~60 Hz +/- 5 %. Make sure to check the power specification of the wall outlet
before connecting your receiver to the main power