Filter
Top Products
PART 1
•
English
41
Solution
Firmly press the scart connectors on the
backside of the TV and receiver. Replace
the scart cable
Check the signal strength with a spectrum
analyser and adjust your dish correctly.
Once the weather is better the picture will
appear. If not : check if there is no snow on
your dish
Press the SAT button on the RCU and
select the correct satellite
Check settings in LNB- and Channel set up
menu
Ask your dealer to check the outdoor unit
and antenna cable to LNB
Check whether the batteries are inserted
correctly in your remote control. Check the
batteries, and if they are exhausted,
replace them
Symptoms
No sound or picture
No picture
The receiver displays
the message “No or
Bad signal” during
bad weather conditions
(heavy rain or snow)
The receiver displays
the message “No or
Bad signal”
The receiver displays
the message “No or
Bad signal”
The receiver displays
the message “No or
Bad signal”
The remote control is
not working
Cause
Problem in scart cable
connections between
receiver and TV
Wrong alignment of
the dish
This is normal, the
bad weather is
interfering the signal
between the satellite
and your dish
Wrong satellite selected
in the menu
Wrong parameters set
in the menu
Wrong alignment of
the dish
The batteries of the
remote control are
not inserted or
exhausted