Filter
Top Products
System Info: The system information displays information about your receiver
such as model number, software and boot version. To check system
information, apply the following steps:
1. Select “System information” and press OK. Press Back to return to the menu
Mediaguard: Here you will find information about the
embedded Mediaguard decoder.
1. Select “Mediaguard” and press OK.
Press Back to return to the menu
Factory Reset: Be careful when using this function, because it will erase all
the data and parameters you may have set earlier to your receiver. Once you
have made a Factory Reset you will have to re-install your preferences and
re-scan your channels. To reset your receiver to factory default, apply
the following steps:
1. Select “Factory Reset” and press OK.
2. Enter your PIN Code. The receiver will reset itself to the original factory
settings.
Note:
Your PIN code will change back to the factory setting “0000”.
PART 1
•
English
28