Filter
Top Products
PART 1
•
English
11
3.1.3 Advanced connection (Please see inside cover Figure 6)
Connect the satellite signal from the LNB to the SAT IN connector.
Connect the TV scart connector at the back of the receiver to the scart-in
connector on your TV set.
Connect the VCR scart connector at the back of the receiver to the scart-in
connector on your VCR set.
Connect a UHF coaxial lead coming from your Cable TV or Outdoor Antenna to
the ANT input connector at the back of the receiver.
Connect a coaxial cable to the TO TV connector at the back of the receiver.
Connect the other end of this coaxial cable to the ANT IN connector of your VCR.
Connect the TV OUT connector of your VCR to the ANT IN connector of your TV
set with a coaxial cable.
Optional: Connect the audio left and right RCA-plugs (Red and White) on the
back of your receiver to the left and right input of an Audio amplifier, so you can
enjoy the excellent quality of the sound that is produced by your Strong receiver.
Note:
If you have an digital audio amplifier with an coaxial input, use the S/PDIF output.
at the back of your receiver.
3.1.4 Connection with Audio Cable RCA Connectors
(Please see inside cover Figure 7)
On the back of your receiver you will find 3 RCA connectors (Audio Left & Right -
Red & White, Video - Yellow)
Install an audio/video cable between the RCA connectors of the receiver and
those of your TV set or amplifier.