Filter
Top Products
3.0 Connections
3.1 Connecting to your TV & VCR
Warning:
If you are not sure how to connect your receiver, do not take the risk of doing it yourself.
Ask your Strong dealer to do it for you. They are specially trained by our technicians and
can get the best performance out of your receiver.
3.1.1 Basic connection with a coaxial cable (Please see inside cover Figure 4)
Connect the satellite signal from the LNB to the SAT IN connector.
Connect the TO TV connector at the back of the receiver to the ANT IN connector
on your TV set.
Optional: Connect a UHF coaxial lead coming from your Cable TV or Outdoor
Antenna to the ANT input connector at the back of the receiver.
3.1.2 Basic connection with a Scart cable (Please see inside cover Figure 5)
Connect the satellite signal from the LNB to the SAT IN connector.
Connect the TV scart connector at the back of the receiver to the scart-in connector
on your TV set.
Optional: Connect a UHF coaxial lead coming from your Cable TV or Outdoor
Antenna to the ANT input connector at the back of the receiver.
Note: We recommend you to use a scart cable to connect your satellite receiver to you
TV, this will ensure a better Picture and Sound quality.
PART 1
•
English
10