Filter
Top Products
4.0 Quick start
Check if all connections between Satellite receiver, Dish, TV and VCR are correct.
Connect the receiver to the mainpower and switch the unit ON with the Power
ON / Standby-button on the frontpanel or on the Remote control.
Switch ON your TV set.
If you have connected your satellite receiver to your TV by using a SCART cable, your TV
will automatically switch to the signals coming from your satellite receiver. If you don't see
the picture from the satellite receiver now, please switch your TV manually to the External
video source, you can do this by pressing the AV or EXT button on the Remote control of
your TV.
Note:
Refer to your TV manual to find out how your TV switches to the External video Source˛
If you have connected your satellite receiver to your TV by using a UHF cable, you will first
need to find the correct UHF channel on your TV.
Select a free preset on your TV (for example Program number 10).
Open the menu of your TV and select the (automatic) channel search option.
(refer to the user manual of your TV set if you don't know how to use the search
function).
Start the channel search option on your TV and search UHF channels until you
see the picture from the satellite receiver.
Store the position in the TV memory (refer to the user manual of your TV set if
you don't know how to store channels in your TV).
If you have correctly followed above steps you will now see the System Set UP menu
generated by your satellite receiver. You are now ready to Set Up your receiver:
1. The cursor of the menu highlights the “Language Settings”.
PART 1
•
English
14