Filter
Top Products
PART 1
•
English
40
A.1 Trouble Shooting
Occasionally receivers can hang-up (just like a PC) so you are recommended to reset the
receiver by disconnecting it from mains power. Wait 30 seconds and connect to mains
power again and now check if the unit is working as expected. If the receiver does not
work properly after checking the trouble shooting section, please contact the dealer. Don't
open the receiver cover, it may cause an electrical shock due to high current voltage and
the warranty of your receiver will be void if the receiver has been opened.
Symptoms
The green/red lights
on front panel do not
light up
No picture and sound
No picture and sound
No picture and sound
No sound
Cause
The power cord is not
plugged in
TV is set to wrong
channel
Problem in cable
connections between
receiver and TV
Receiver “hang-up”
The receiver or TV is
in “MUTE” mode
Solution
Check that the power cord is plugged into
the wall outlet
Check if the TV is switched on and set your
TV to the correct EXT / AV or UHF channel
Check if the scart and/or RF cable is
connected correctly to the TV and to the
back of the receiver
Disconnect the main power cord of the
receiver from the 220V main power.
Reapply the power and “Reset” from the
menu. Retuning as if for the first time
Press the MUTE button on the remote
control unit of your receiver and TV