Filter
Top Products
RECORDING AND PLAYBACK
INSTRUCTION
D-1 Recording
Manual Recording:
1. Use the [Record] button to start recording, will be a red dot on the top right side
corner of the monitor which indicates the recording is in progress.
2. Press the [Stop] button to stop the recording and the red dot will turn off.
Timer Recording:
Refer to section A-3
Remark: The Channel 1 timer setting has the "Peak" time setting (from number 16 option),
the peak setting is not available for other channel. After the "Peak" had been selected,
the device will not have any stand-by mode while no setting required.
Alarm Recording:
Refer to section A-4
Remark: When the device is in stand-by mode, there would be a 15~20 second time
delay when the alarm recording activates and recording starts.
D-2 Playback
Playback all record:
Refer to section C-1
Playback Alarm record:
Refer to section C-2
Playback the recent record:
Press the [Play] button to playback current channel information;
D-3 Playback with time select
1. Use the [F1] button for current playback channel, to select the time for playback
2. Use the [Stop] button to stop the playback.
D-4 Stop Playback
1. Use the [Stop] button to stop the playback;
D-5 Slow Playback:
1. Use the [Slow] button to slow motion the playback, with speeds at 1/2, 1/4 or 1/8.
2. Use the [Play] button to return to normal speed.
D-6 Pause Playback and Frame by Frame playback
1. Use the [Pause] button to pause the motion.
2. While motion is paused, using [Pause] again to play frame by frame playback.
3. Press the [Play] button to return to normal speed.
D-7 Fast Forward
1. Press the [FF] button to perform fast forward playback, with speeds at X2 or X4.
2. Press the [Play] button to return to normal speed.
D-8 Fast Backward
1. Press the [FB] button to perform fast backward playback, with speed at X2 or X4.
2. Press the [Play] button to return to normal speed.