Filter
Top Products
TANDBERG 1500 MXP
76
4.4.2 Audio Algorithm
The system will automatically select the best audio algorithm based on the call rate and the
capabilities of the remote system. Use this menu to disable audio algorithms in case you want
to remove “low quality” audio, or if you have interoperability issues calling other systems.
G.722
High quality audio (7 kHz at 48kbps, 56kbps or 64kbps)
G.728
Compressed normal quality audio (telephone quality, 3.1 kHz at 16kbps)
G.711
Normal quality audio (telephone quality 3.1kHz at 64kbps). This audio
algorithm is mandatory for video conferencing equipment and is impossible to
uncheck.
G.722.1
Compressed high quality audio (7 kHz at 24kbps and 32kbps).
AAC_LD
CD-quality audio, MPEG-4 Advanced Audio Coding Low Delay (20 kHz,
stereo at 128kbps20kHz, mono at 64kbps).
Call Rate vs Audio algorithms selected
Modify/remove algorithms used by uncheck the different audio algorithms
Automatically preferred audio algorithms on call rates up to and including 192kbps
1. G.722.1 (24kbps or 32kbps)
2. G.728 (16kbps)
3. AAC-LD (56kbps or 64kbps)
4. G.722 (48kbps, 56kbps or 64kbps)
5. G.711 (48kbps, 56kbps or 64kbps)*
6. AAC-LD (48kbps or 128kbps)
Automatically preferred audio algorithms on call rates above 192kbps
1. AAC-LD (128kbps)**
2. AAC-LD (64kbps or 56kbps)
3. G.722 (64kbps, 56kbps or 48kbps)
4. G.722.1 (32kbps or 24kbps)
5. G.728 (16kbps)
6. G.711 (64kbps, 56kbps, 48kbps)*
7. AAC-LD (48kbps)
* AAC-LD, G722 and G711 at 64kbps are used for audio in H323 (IP) calls only
** Dependent that the call rate is above the AAC-LD 128 threshold.