Filter
Top Products
SECTiON4: RECORDING
3 Press MEMO I and the display will momentarily read
like this before indicating the current punch in point.
4 You’ll notice that a period is blinking in the hours
column to show that you can key in the desired
number of hours using the A and V keys.
0 Each time you press MEMO 1, the blinking period
moves to the next cohmm (H, M, S, then F).
0 When no period in any column is blinking, the
hours, minutes, seconds and frame number change
all at once as you press the A or the V key.
l Tocleaxthedisplay to”fl0flflnflflfl”,hold the V
or the A key and press the other.
l You can enter any time from zero up to 23 hours,
59 minutes, 59 seconds, and 33 frames.
” u 0 F
5 Make sure that the entered punch in point is correct,
then press MEMO 2 and the display will momentarily
read like this before indicating the current punch out
point.
6 You’ll notice that a period is blinking in the hours
column, so enter the desired hours using the A and V
keys.
l Each time you press MEMO 2, the blinking period
moves to the next column (H, M, S, then F).
l When no period in any column is blinking, the
hours, minutes, seconds and frame number change
all at once as you press the A or the V key.
l Toclearthedisplay to”~~~~~~~~“,hold~e V
or the A key and press the other.
. You can enter any time from zero up to 23 hours,
59 minutes, 59 seconds, 33 frames.
” u s F
7 To exit the punch in/out point setting mode, press
SHIFT. ‘I%e display will be switched back to show the
ABS time.
-
To audition the entered points :
l Pressing the LOC 1 key autolocates the tape to a
point 5 seconds (or user selected time) lower than
the entered punch in point, then press PLAY.
l Pressing the LOC 2 key autolocates the tape to a
point 5 seconds (or user selected time) lower than
the entered punch out point, then press PLAY.
Pre Point In Point
Out Phi
I
I I I
I
A
k.cl PWIJII
I’
Time
LO.2 2 ;;r&r;ll
Speaking of remembering :
The double function keys in the center of the unit
offer the upper black-lahelled functions when the
SHIFT LED is turned off.
When the SHIFT LED is blinking, they offer the
lower blwlabelled functions.