Filter
Top Products
SECTION 4 : RECOROING
1 4-4. Crossfade Time Setting
I
1 4-5. Preroll Time Setting
Seamless punch in and out of record is ensured by a
crossfade action which is factory preset to 10 millisec-
onds. You can change this time up to 90 ms at a menu, in
10 ins steps.
1 Press SHIFT and the associated LED will start blink-
ing to show that all the double function keys are
switched to offer their lower blue-labelled functions.
F!!!l
El
2 Press MENU to access a crossfade. menu, which looks
like this :
3 Enter the desired time using the A and V keys.
4 To exit the menu mode, press SHIFC The display will
be switched back to show the ABS time.
The DA-38 is factory preset to offer 5 seconds of preroll
up to punch in points. You can change the time up to S9
minutes 59 seconds, in 1 second steps, if you want to, as
Pm Point
In Point
‘U
Preroll Time
1 Press SHIFT and the associated LED will start blink-
ing to show that all the double function keys are
switched to offer their lower blue-labelled functions.
I ..A4 I
2 Press PRE ROLL. The time now appearing on the
display is an autolocation preroll time and not for
punch-in. (Autolocation preroll time is explained in
Section 6)
h
3 Press PRE ROLL once more and the display will now
show the current punch-in preroll time, like this :
4 Enter the desired preroll time using the A and V
keys.
If you hold the V key and press the A
key, the display is cleared to the factory preset
(“Pr.flflfl5.r h”).
5 Press SHIFT to exit the preroll time setting mode and
switch the display back to show the ABS time.