Filter
Top Products
SECTION 5: PLAYBACK
5-6. Oelaying Tracks
The track delay function corrects the time discrepancies
The display is cleared if you hold either the A or
between each track or may be used for other effects.
the V key and press the other.
Adjustable range is from -200 samples (*) to 7200
samples, in 1 sample steps, or from -4 ms to 150 ms, in 1
rns steps, as selected.
*Each time you press DELAY, the unit changes
between “sample” and “ms”.
(*) 1 sample corresponds to 22.7 ps at a 44.1 kHz
sampling rate cw 20.8 ps at a 48 kHz sampling rate.
You can enter a 4.digit sample number or a 3-digit
ms number.
0 If you press and hold DELAY, the display will
change to look like this and you can enter one and
the same delay time for all the tracks at once.
2
P
4 153
1 Press SHlFT and the associated LED will start blink-
ing to show that all the double function keys are
switched to offer their lower blue-labelled functions.
2 Press DELAY and the display will show the track
whose timing you have corrected after any other
tracks and the delay value you have entered for that
track, like this.
4 Enter the desired delay value by means of the A and
V keys.
The DELAY indicator will light solidly on the display
to remind you that a track or tracks are already
programed to delay.
5
Press SHIFT.
The associated LED will turn off and the display will
be switched back to show the ABS time.
3 Select the track you want to delay by pressing its
REC FUNCTION switch.
5-5