Filter
Top Products
SECTION 4 : RECOROING
1 4-6. Postroll Time Settino 4-7. Copyino Tracks
The DA-38 is factory preset to play for 3 seconds after
dropping out of record. You can change the time up to 59
minutes 59 seconds at a menu, in 1 second steps.
Out Point
-
32
1 Press SHIFT and the associated LED will start blink-
ing to show that all the double function keys are
switched to offer their lower blue-labelled functions.
l
El
2 Press MENU to access a postroll menu, which looks
like this :
3 Enter the desired postroll time using the A and V
keys.
4 Press SHIFT to exit the menu mode and switch the
display back to show the ABS time.
The DA-38 has a track matrix and you can assign any
sources (tracks or inputs as discussed below) to any loca-
tions, that is, to any tracks. So, for instance, you can
record input 1 on track 2 and copy track 8 to track 5,
simultaneously.
Here is an outline of the track copy procedure :
TRK COPY
+
Target track selection (REC FUNCTION)
+
Source selection (A / V)
+
RECORD + PLAY
PRECAUTIOA’S
l When the track copy function is disabled
(? r.c F o F F ” as the d&pay reads), you cannot
proceed to specify tracks or inputs,
l Even if a sowca and a target track are specified,
the track is not recorded unless the track’s REC
FUNCTION switch is pressed on.
. Simifarfy, even if a source and a target track are
specified, the source is not fed to the track when
the track copy function is disabled (‘f r.c F
0 F F ,y.
4*9