Filter
Top Products
SECTION 4 : RECORDING
(2) Copying Tracks of One DA-38 to Tracks of Another
AS EUI example, M’s copy track 2 of first unit to track 1 of second unit
9 8 275
. Hook up a &vo DA-38 sync system. If necessary, refer
to Section 7.
l Be sure to connect the units by using the optional PW-
88D dubbing cable.
WARNING
Each time you press the A key, the rightmost display
will change in sequence, like this (” I” for input, and
“k ” for track) :
1 Press the DIGITAL IN switch on the second unit The
indicator DIGITAL IN will light on the display.
@4w
l
-iyc
2 Press SHIPT on the second unit. The associated LED
will start blinking to show that all the double function
keys are switched to offer their lower blue-labelled
functions.
&
0
l
3 Press the TRK COPY key on the second unit. The
display will read “b r.c F
o f F “.
4 Press the A or the 7 key on the second unit to change
the. “off ” display to “on “,
5 Press the REC FJUNCTION switch for track 1 on the
second unit. The associated LED will start blinking
and the display will change to look like this :
6 Select input 2 by means of the A and V keys.
(Remember, tracks of the first unit are ‘inputs’ to the
second unit.)
The 7 key genera& them in reverse order.
l If you hold the A or the V key and press the other,
the display is switched back to show the default
source selection c’ t /” in our example).
7 Press SHIFT on the second onit to exit the track copy
seuing mode. The SHIPT LED will mm off and the
display will be switched back to show the ABS time.
8 Hold RECORD and press PLAY on the second unit
9 Press PLAY on the first unit
Track 2 of the first onit is copied to track 1 of the
second unit.
l You can also copy tracks of a DA-38 to other tracks
of the sane unit (discussed in the previous para-
graph) while at the same time making a digital copy
be&w, two DA-38s.
T&get Track