Filter
Top Products
SECTlON4: RECORDING
(4) To Switch Off the Track Copy Mode
23
Press SHIFT and the associated LED will start blink-
ing to show that all the double function keys are
switched to offer their lower blwlabelled functions.
2 Press the TRK COPY key and the display will show
the last track copy setting (“k r.c P.?
r :” for exam-
ple).
Depending on the last setting, the display will read
“k r.c F 0 n ” at this stage. If this is the case, skip to
step 4.
3 Press the TRK COPY key once more and the display
will read “k r.c P
on Il.
4 Press either the A or the V key to change the “0 n ”
display to “off “.
(5) Track Copy Settings Backed Up
Your settings for track copy are automatically saved to a
backup memory and are not erased when turning off
power : they become the default.
Also, if you press and hold the TRK COPY key (for 1
second or more), the display will show the current track
copy settings as follows :
Display
Setting for
l T%e tens of hours column
Track I
l The units of hours column
Track 2
l The tens of minutes column
Track 3
l The units of minutes column
Track 4
l The tens of seconds column
Track 5
l The units of seconds column
Track 6
l The tens of frames column
Track I
l The units of frames column
Track 8
A solidly lit period in any columns indicates a track of the
DA-38, and an extinguished period indicates an input.
For example :
In this case, track 1 is selected by the user as the source of
track 2, and input 6 as the source of track 5, the remaining
tracks being left alone.