Filter
Top Products
ENGLISH
Connection 1
10
Connection to audio/video components
DIGITAL IN terminals
Used for the input of digital audio signals. Connect these
digital input terminals to the appropriate digital output
terminals of the digital audio source unit such as a DVD or
CD player.
Use a good quality RCA coaxial cable or optical digital cable.
DIGITAL OUT terminal
The digital signals coming in through the DIGITAL IN
terminals are sent out through this terminal.
Connect to the digital input terminal of a digital recording
device such as a CD recorder using a commercially-
available optical digital cable.
<
When inserting the plug of the optical cable, the protective
shutter of the terminal will open and you should hear it click
into position when fully inserted. Be careful that you do not
force the plug, because this could result in damage to the
protective shutter, the cable, or the unit itself.
AUDIO IN/OUT jacks
Analog 2-channel audio signal is input or output from these
jacks. Connect the component with commercially-available
RCA cables.
Make sure to connect :
white plug q
white jack (L: left channel)
red plug q
red jack (R: right channel)
7CH DIRECT IN jacks
If your DVD player or decoder has 6 or 7-channel analog
audio outputs, connect them with good quality RCA cables.
<
If the component to be connected has only 6 channel
outputs, do not use the SURROUND BACK jack.
D
C
B
A
DIGITAL IN
DIGITAL OUT
LINE INLINE OUT
RR
LL
D
SURROUND SUBWOOFERFRONTCENTER
6.1CH AUDIO OUT
RRLL BACK
A
B
CD-R, MD, etc.
DVD, CD, etc.
TAPE
DVD player or Decoder
Lecteur DVD ou Décodeur
Reprodcutor de DVD o
Descodificador
C
CAUTION:
<
Switch off the power to all equipment before making
connections.
<
Read the instructions of each component you intend to use
with this unit.
<
Be sure to insert each plug securely. To prevent hum and
noise, avoid bundling the signal interconnection cables
together with the AC power cord or speaker cables.