Filter
Top Products
ENGLISH
DOLBY PRO LOGIC II MUSIC parameters
1
68
You can adjust the parameters for DOLBY PRO LOGIC II MUSIC.
Select DOLBY PRO LOGIC II MUSIC mode by pressing the DSP
button.
Select the parameter to be changed by pressing the PRO
LOGIC II MUSIC PARAMETER button.
Each time the PRO LOGIC II MUSIC PARAMETER button is
pressed, the parameter is changed as follows:
Within 8 seconds, press the SELECT button to change the
value.
PANO (panorama):
This mode extends the front stereo image to include the
surround speakers for an exciting wraparound effect with
side wall imaging. Select "ON" or "OFF".
The default setting is "OFF".
C-WID (center width control):
This adjusts the center image so it may be heard only from
the center speaker, only from the left/right speakers as a
phantom image, or from all three front speakers to varying
degrees.
The adjustable range is from 0 to 7. The default setting is "0".
DIMEN (dimension control):
This adjusts the sound-field either towards the front or
towards the rear. The adjustable range is from -4 to +2. The
default setting is "0".
Repeat step and to adjust other parameters.
When all the configurations have been finished, leave the unit
for 8 seconds to exit.
32
3
2
1
2
3
213
PANO C-WID DIMEN