Teac AG-10DAV Home Theater Screen User Manual


 
ENGLISH
22
C
D
B
A
G
F
H O
N
M
L
K
J
I
P
E
Remote Control Unit
Remote Select buttons (RECEIVER, CD, TAPE/MD, TV, VCR,
DVD, CABLE, SAT)
You have to select the device you want to operate by pressing
the corresponding button, or the remote control will not work
at all.
If you want to operate the receiver, first press the RECEIVER
button, and then press other buttons (POWER, VOLUME, etc.)
to operate the receiver.
MACRO (M1, M2, M3)
Use these buttons to execute the programmed macro
functions.
SELECT
After pressing the SP SETUP or the PLII PARA button, use
these buttons to change the setting.
OSD
Use this button to display the OSD (on-screen display).
Direction buttons (up/down/left/right)
Use these buttons to select an item in the OSD.
In FM tuner mode, these buttons are used for RDS function.
ENTER
Use this button to enter your selection.
SLEEP
Use this button to set sleep timer.
TUNING
Use these buttons to tune in a station.
LED
When buttons are pressed, LED will light.
CHANNEL/LEVEL
Use these buttons to adjust the level of each speaker.
When controlling TV or VCR, these buttons can be used to
select a channel.
MUTING
Use this button to mute the sound temporarily.
T.TONE
Use this button to output the test tone.
DIMMER
Use this button to dim or turn off the display.
P.SCAN
Use this button to scan preset channels.
PRESET
Use these buttons to select a preset channel.
Numeric buttons
When controlling a device other than receiver, these buttons
can be used to select track numbers, TV channel, etc.
P
O
N
M
L
K
J
I
H
G
F
E
D
C
B
A
Note:
<
To simplify explanations, instructions refer to names of buttons
and controls on the front panel, making no mention of the use
of remote control unit.
<
Names colored in blue are mainly used for the receiver.
<
Encircled names are exclusive for DVD operation.
Names of Each Control 2